PRIMEQUEST 1000 Series REMCS Installation Manual
CHAPTER 5 REMCS Service Detail Settings
5.1
Overview of REMCS Service Detail Settings
REMCS Service Detail Settings are used to make detailed settings such as the transmission retry count and timeout
triggers for avoiding transmission problems. They are also used to change the REMCS Center to connect to, switch
the machine name to be displayed, and for other purposes.
Normally, these settings need not be used. Use them when so instructed by a field engineer or the support center.
To start the window to be used for the REMCS service detail settings, select [Maintenance] - [REMCS] - [Detail
Setup] from the MMB Web-UI.
The initial window shown in
FIGURE 5.1 FE operation initial window
TABLE 5.1 Items of the FE operation initial window
Item
Detail environment
settings
Selecting REMCS
Center
Select language
Machine name display
change
Deleting the personal
information
FIGURE 5.1 FE operation initial window
Change the timeout triggers, the retry count, etc., that are applicable when the Internet is
used.
Changes the REMCS Center to connect to.
Switches the displayed language between Japanese and English.
Specifies whether to use the machine ID or a unique name as the machine name displayed
by the Web-GUI.
Deletes the personal information included in the customer information.
appears.
Description
50
C122-E120-06EN