Export Settings; Connection Type Change; Figure 4.5 [Exportation Of The Remcs Settings] Window - Fujitsu PRIMEQUEST 1000 Series Installation Manual

PRIMEQUEST 1000 Series REMCS Installation Manual
CHAPTER 4 REMCS Service Operations
2. After changing the periodic connection schedule, click the [Next] button. A connection check is performed
to report the schedule to the REMCS Center. When the processing completes, you will be returned to
4.1 [REMCS initial]
If your purpose is confirmation only, click the [Cancel] button. You will be returned to
initial] window.
The administrator's e-mail address entered in the [Customer Information] window receives an e-mail notification
of completed connection check.
4.2.5

Export Settings

Use this menu item to save the customer information and environment setting information to local files.
The exported setting information can be used in different servers to start the REMCS service regardless of the
operating system.
1. From the menu in the window shown in
The window shown in
2. Click [Environment information] or [Customer Information].
The dialog box for specifying the file name and the file store location. Specify the following files.
- Customer information: rm_bkcus.def
- Environment information: rm_bkenv.def
3. Click the [Cancel] button to return to the window shown in

FIGURE 4.5 [Exportation of the REMCS settings] window

4.2.6

Connection type change

Use this menu item to change the current connection configuration to another configuration.
window.
FIGURE 4.1 [REMCS initial]
FIGURE 4.5 [Exportation of the REMCS settings] window
window, click [Export Settings].
FIGURE 4.1 [REMCS initial]
37
FIGURE
FIGURE 4.1 [REMCS
appears.
window.
C122-E120-06EN