PRIMEQUEST 1000 Series REMCS Installation Manual
CHAPTER 6 REMCS Messages
6.1
Messages in REMCS Windows
This section describes the messages displayed in the REMCS windows.
In the messages, xxx represents a character string such as a returned value that should be replaced when printed
out.
TABLE 6.1 Messages common to all windows
Message code
RMG_0150
Failed to read setting file. (xxx)
RMG_1121
This session was disconnected.(xxx)
RMG_1123
This session was disconnected.
RMG_1125
Session timeout.
RMG_1135
This session was disconnected.
TABLE 6.2 Messages at GUI startup
Message code
Failed to get Machine status. (xxx)
RMG_0001
RMG_0002
Failed to make frame screen data. (xxx)
Failed to get Machine ID..(xxx)
RMG_0007
RMG_0012
Change language to English.
RMG_0018
Failed to get registration data..(xxx)
Failed to setting Machine status.(xxx)
RMG_0041
RMG_0164
Failed to change language to Japanese.(xxx)
RMG_0165
Failed to change language to English.(xxx)
RMG_0166
Change language to Japanese completed.
RMG_0167
Changing language to English completed.
RMG_0172
Failed to get Destination information. (xxx)
Message
Message
58
Action
If the error still occurs when you
retry the operation, exit and
restart the REMCS window and
try again. If the problem is not
solved, contact the support
center.
If operations need to be
performed in the REMCS
window, restart the REMCS
window.
Action
If the error still occurs when you
retry the operation, exit and
restart the REMCS window and
try again. If the problem is not
solved, contact the support
center.
None.
If the error still occurs when you
retry the operation, exit and
restart the REMCS window and
try again. If the problem is not
solved, contact the support
center.
Proceed with registration.
If the error still occurs when you
retry the operation, exit and
restart the REMCS window and
try again. If the problem is not
C122-E120-06EN