Figure 3.16 [Connection Check Information] Window; Figure 3.17 [Information Transmit Agreement] (For Automatic Setting) Window - Fujitsu PRIMEQUEST 1000 Series Installation Manual

PRIMEQUEST 1000 Series REMCS Installation Manual
CHAPTER 3 REMCS Service Start Procedure

FIGURE 3.16 [Connection check information] window

- Notification of the result to the administrator: Specify whether to report the result to the administrator.
The administrator e-mail address in the imported customer information is displayed as your
administrator e-mail address.
- Notification of the result to the installer: Specify whether to report the result to the installer. If you
select notification, set the installer's e-mail address in [E-mail address for receiving results].
4. Click the [Next] button to set automatic registration.
The window shown in
appears.

FIGURE 3.17 [Information Transmit Agreement] (for automatic setting) window

5. Confirm the agreement and click the [Agree] button.
FIGURE 3.17 [Information Transmit Agreement] (for automatic setting) window
27 C122-E120-06EN