Table 6.15 Messages In The [Customer Information] Window - Fujitsu PRIMEQUEST 1000 Series Installation Manual

PRIMEQUEST 1000 Series REMCS Installation Manual
CHAPTER 6 REMCS Messages
Message code
RMG_0056 Failed in the connection check notification.(xxx)
RMG_0186 Failed to send notice of changing agent information.
Failed to send agent information.
RMG_0187

TABLE 6.15 Messages in the [Customer Information] window

Message code
RMG_0001 Failed to get Machine status. (xxx)
RMG_0002 Failed to make frame screen data. (xxx)
RMG_0004 Invalid CGI parameter specified.
RMG_0006 Failed to get connect mode. (xxx)
RMG_0015 Invalid entry.
RMG_0018 Failed to get registration data. (xxx)
RMG_0029 Invalid length.
RMG_0036 Required entry.
RMG_0065 Failed to get customer information.(xxx)
RMG_0066 Customer Information setting frame display
completed.
RMG_0068 Invalid character specified in [Company Name].
RMG_0069 Invalid character specified in [Department/Division].
RMG_0070 Invalid character specified in [Address].
RMG_0071 Invalid character specified in [Building].
RMG_0072 Invalid character specified in [Administrator Name].
RMG_0073 Invalid character specified in [Machine Installation
Site].
RMG_0074 Invalid character specified in [Machine Installation
Building].
Message
Message
67
Action
Check whether the network
status is normal.
Action
If the error still occurs when you
retry the operation, exit and
restart the REMCS window and
try again. If the problem is not
solved, contact the support
center.
Correct the entered value.
If the error still occurs when you
retry the operation, exit and
restart the REMCS window and
try again. If the problem is not
solved, contact the support
center.
Enter a valid length.
Enter a valid value.
If the error still occurs when you
retry the operation, exit and
restart the REMCS window and
try again. If the problem is not
solved, contact the support
center.
None.
Confirm the valid characters and
correct the entry.
C122-E120-06EN