Figure 3.13 [Result Of Connection Check] Window - Fujitsu PRIMEQUEST 1000 Series Installation Manual

PRIMEQUEST 1000 Series REMCS Installation Manual
CHAPTER 3 REMCS Service Start Procedure
- Notification of the result to the administrator: Specify whether to report the result to the administrator.
If the personal information is not deleted, the administrator's e-mail address you entered during the
customer information setting is displayed.
- Notification of the result to the installer: Specify whether to report the result to the installer. If you
select notification, set the installer's e-mail address in [E-mail address for receiving results].
2. Click the [Check] button to perform the connection check and display the window in
of connection check]

FIGURE 3.13 [Result of connection check] window

3. Click the [OK] button.
After the connection check is completed, the window in
window.
FIGURE 4.1 [REMCS initial] window
25
FIGURE 3.13 [Result
appears.
C122-E120-06EN