Hw Config. Info; Sw Config. Info; Figure 4.18 [Sending Hardware Configuration Information] Window - Fujitsu PRIMEQUEST 1000 Series Installation Manual

PRIMEQUEST 1000 Series REMCS Installation Manual
CHAPTER 4 REMCS Service Operations
4.2.13

HW Config. Info.

Use this menu item to send the hardware configuration information of the server to the REMCS Center.
From the menu in the window shown in
the window shown in FIGURE 4.18 [Sending Hardware Configuration Information]
1. Click the [Send] button.
A confirmation dialog box appears. Send the hardware configuration information to the REMCS Center.
After processing completes, a pop-up window appears with the results. Then, the window shown in
4.1 [REMCS initial] window

FIGURE 4.18 [Sending Hardware Configuration Information] window

4.2.14

SW Config. Info.

Use this menu item to send the software configuration information of the server to the REMCS Center.
From the menu in the window shown in
the window shown in FIGURE 4.19 [Sending Software Configuration Information]
1. Click the [Send] button.
A confirmation dialog box appears. Send the software configuration information to the REMCS Center.
After processing completes, a pop-up window appears with the results. Then, the window shown in
4.1 [REMCS initial] window
FIGURE 4.1 [REMCS initial]
appears.
FIGURE 4.1 [REMCS initial]
appears.
46
window, click [HW Config. Info.] to display
window.
window, click [SW Config. Info.] to display
window.
FIGURE
FIGURE
C122-E120-06EN