Table 6.28 Messages In The [Select Language(Japanese Or English)] Window; Table 6.29 Messages In The [Select To Display Machine Id Or Machine Unique Name] Window - Fujitsu PRIMEQUEST 1000 Series Installation Manual

PRIMEQUEST 1000 Series REMCS Installation Manual
CHAPTER 6 REMCS Messages
Message code
Failed to get Destination information. (xxx)
RMG_0172

TABLE 6.28 Messages in the [Select language(Japanese or English)] window

Message code
Failed to make frame screen data. (xxx)
RMG_0002
RMG_0004 Invalid CGI parameter specified.
RMG_0041 Failed to setting Machine status.(xxx)
RMG_0162
Select language(Japanese or English) frame display
completed.
RMG_0163 Change language.
After this operation, you have to execute registration
again.Are you sure?
RMG_0164 Failed to change language to Japanese.(xxx)
RMG_0165 Failed to change language to English.(xxx)
RMG_0166
Change language to Japanese completed.
RMG_0167 Changing language to English completed.
RMG_0190
Change language.Are you sure?

TABLE 6.29 Messages in the [Select to Display Machine ID or Machine Unique Name] window

Message code
RMG_0002 Failed to make frame screen data. (xxx)
RMG_0004 Invalid CGI parameter specified.
Message
Message
Message
75
Action
restart the REMCS window and
try again. If the problem is not
solved, contact the support
center.
Action
If the error still occurs when you
retry the operation, exit and
restart the REMCS window and
try again. If the problem is not
solved, contact the support
center.
None.
Click the [OK] or [Cancel]
button.
If the error still occurs when you
retry the operation, exit and
restart the REMCS window and
try again. If the problem is not
solved, contact the support
center.
Proceed with registration.
Click the [OK] or [Cancel]
button.
Action
If the error still occurs when you
retry the operation, exit and
restart the REMCS window and
try again. If the problem is not
solved, contact the support
center.
C122-E120-06EN