Remcs Service Menu; Customer Information Update; Re-Register - Fujitsu PRIMEQUEST 1000 Series Installation Manual

PRIMEQUEST 1000 Series REMCS Installation Manual
CHAPTER 4 REMCS Service Operations
4.2

REMCS Service Menu

This section describes the REMCS service menu items.
4.2.1

Customer Information update

Use this menu item to confirm the customer information entered on registration or to change the information such
as the administrator name or company address.
The procedure for displaying and confirming the customer information is as follows.
1. From the menu in the window shown in
update].
The [Customer Information] window appears.
2. If your purpose is confirmation only, click the [Cancel] button. If you want to update the information, change
the relevant value and click the [Next] button.
The [Customer Information Review] window appears.
3. Confirm the information. If everything is correct, click the [Next] button.
The FIGURE 3.10 [Information Transmit Agreement] window
If you find any wrong information and need to correct it, click the [Back] button to return to the [Customer
Information Review] window.
4. After confirming that your environment is enabled for sending e-mails, click the [Agree] button.
The entered information is automatically sent to the REMCS Center. When the e-mail transfer is completed,
the [Registration result] window appears.
5. Click the [Next] button to return to the initial window.
- The administrator's e-mail address entered in the [Customer Information] window receives an e-mail
notification of completed registration.
- Any updates to the user registration information before receiving the e-mail notification should be
invalid. Be sure to update the information after receiving the e-mail notification of completed
registration.
4.2.2

Re-register

You can use this menu item only when you have not yet registered customer information after updating it in the
[Customer Information] window.
The procedure for re-registration is as follows.
1. From the menu in the window shown in
The FIGURE 3.10 [Information Transmit Agreement] window
2. After confirming that your environment is enabled for sending e-mails, click the [Agree] button.
The entered information is automatically sent to the REMCS Center. When the e-mail transfer is completed,
the [Registration result] window appears.
3. Click the [Next] button to return to the window shown in
FIGURE 4.1 [REMCS initial]
appears.
FIGURE 4.1 [REMCS initial]
appears.
FIGURE 4.1 [REMCS initial]
34
window, click [Customer Information
window, click [Re-register].
window.
C122-E120-06EN