Start Procedure Overview; Figure 3.1 Remcs Center Registration Flow - Fujitsu PRIMEQUEST 1000 Series Installation Manual

PRIMEQUEST 1000 Series REMCS Installation Manual
CHAPTER 3 REMCS Service Start Procedure
3.1

Start Procedure Overview

To start the REMCS service, the user must register with the REMCS Center (registration).
Registration means to register customer information with the REMCS Center.
This procedure can be omitted if a field engineer has already completed the registration procedure on behalf of the
customer, using the information obtained directly from the customer during product installation.

FIGURE 3.1 REMCS Center registration flow

FIGURE 3.1 REMCS Center registration flow
Before registration, prepare the following information.
- Warranty (contains your machine model name, check code, and serial number)
The warranty is used to confirm that the machine ID displayed at the bottom of the REMCS window is correct.
Example display format: machine ID 00-PQ1000-model name-check code-serial number
shows the screen transitions during the initialization work.
12 C122-E120-06EN