Remcs Center Registration; Starting Remcs; Setting The Connection Configuration; Figure 3.2 [Customer Information Registration Instructions] Window - Fujitsu PRIMEQUEST 1000 Series Installation Manual

PRIMEQUEST 1000 Series REMCS Installation Manual
CHAPTER 3 REMCS Service Start Procedure
3.2

REMCS Center Registration

This section describes how to register with the REMCS Center.
Use the following registration procedure.
-

3.2.1 Starting REMCS

-

3.2.2 Setting the connection configuration

- 3.2.3 Setting up the environment
- 3.2.4 Setting the periodic connection schedule
- 3.2.5 Setting the customer information
- 3.2.6 Confirming the registration result
- 3.2.7 Checking the connection
3.2.1 Starting REMCS
To start REMCS, select the [Maintenance] - [REMCS] - [REMCS] menu in the MMB Web-UI.
If no registration has been made so far, the window shown in
Instructions] window appears.
If the registration has already been made, the window shown in
Instructions] window does not appear. Instead, the window shown in
For details on the procedure, see

FIGURE 3.2 [Customer Information Registration Instructions] window

1. Click the [Next] button.
The window for selecting the REMCS Center to connect to appears.
3.2.2 Setting the connection configuration
Select the REMCS Center to connect to in the window shown in
window.
CHAPTER 4 REMCS Service
14
FIGURE 3.2 [Customer Information Registration
FIGURE 3.2 [Customer Information Registration
FIGURE 4.1 [REMCS initial] window
Operations.
FIGURE 3.3 [Selecting REMCS Center]
appears.
C122-E120-06EN