Setting The Customer Information; Figure 3.8 [Customer Information] Window - Fujitsu PRIMEQUEST 1000 Series Installation Manual

PRIMEQUEST 1000 Series REMCS Installation Manual
CHAPTER 3 REMCS Service Start Procedure
Item
A day of the
week
2. Click the [Next] button.
After the periodic connection schedule is registered, the customer information window appears. Proceed to
3.2.5 Setting the customer
3.2.5

Setting the customer information

Enter the customer information in the window shown in
After starting the REMCS service, you can still change the customer information by clicking [Customer Information
update] from the menu in the window shown in

FIGURE 3.8 [Customer Information] window

You can use the following characters and symbols for input.
- E-mail addresses must include, but cannot begin or end with, an @ mark. Also, the character that follows the
@ mark must not be a dot (.).
- E-mail addresses must not use the following symbols: ( ) < > ; : [ ] \.
The input items and values for the customer information are as follows.
If you specified [Every week] for the period, you need to specify a day of the week
(Sunday to Saturday).
information.
FIGURE 4.1 [REMCS initial]
Description
FIGURE 3.8 [Customer Information]
window.
20
window.
C122-E120-06EN