Basic Operation - Icom IC-3SAT Instruction Manual

reset the transceiver.
4) Use the dial select function for quick tuning:
- While pushing [Е], rotate the tuning control.
e See p. 15 for changing the dial select step.
BASIC OPERATION 5
і
(2 USING THE KEYBOARD .
1) Turn power ON. See steps 1 and 2 at left.
2) Push the appropriate digit key to input the frequency.
e When the wrong digit is input, push [A] (CLR) to clear
the input.
e Push [5] or [0] for the final digit (4th pushing). (Not -
applicable when the 12.5 kHz step is selected.)
e A decimal point appears when the input frequency is
entered.
3) To change the frequency in the tuning step, push [*] (ху)
ог [#1 (A).
|
E
ePushing [*] or [#] for more than 0.5 sec. starts full
scan.
EXAMPLE: Setting frequency at 223.50 MHz using the keyboard.
SKIP CODE
Push keys
Display
. DIAL SEL DIAL SEL