D Checking The Repeater Input Signal; Off Band Indication - Icom IC-80AD Instruction Manual

5
REPEATER AND DUPLEX OPERATIONS

D Checking the repeater input signal

The transceiver can check whether the other station's trans-
mit signal can be received directly or not, by listening on the
repeater input frequency.
Push and hold [SQL] to check whether the other station's
transmit signal can be received directly or not.
• When the other station's signal can be directly received, move
to a non-repeater frequency to use simplex. (duplex OFF)
30
Indication while receiving
Push and hold
Receives –0.6 MHz shift frequency
Blinks while pushing and holding [SQL]
D Off band indication
If the transmit frequency is out of the amateur band, the off
band indication, "OFF," appears on the display when [PTT] is
pushed. Check the offset frequency or duplex direction in this
case.
(p. 31)
U.S.A. and Korean versions:
Auto repeater function uses standard values of the offset
frequency.
CONVENIENT!
Tone scan function: When you don't know the subaudible
tone used for a repeater, the tone scan is convenient for de-
tecting the tone frequency.
Push and hold [T.SCAN](9) for 1 sec. to start the tone
scan. See p. 152 for more information.