Q: Select Fob (#) Arm No Delay (0 To 1) - 2gig Technologies Go!Control Panel Installation & Programming Manual

Go!Control Wireless Security System | Installation and Programming Guide
Q: Select Fob (#) Arm No Delay (0 to 1)
DEFAULT: (0) Disabled
Key fobs can be set to arm the Control Panel with or
without an entry delay.
• The default setting (0) Disabled sets this fob to arm the
system with an entry delay.
• To set this fob to arm the system without an entry
delay, select (1) Enabled.
Q: Select Fob# Key 4 Output (0-2)
DEFAULT: (0) Disabled
The key fob's auxiliary button can be used to trigger the
Control Panel's open collector output.
The default setting (0) Disabled deactivates the fob's
auxiliary button.
To use this fob's auxiliary button, select the output
function:
• (0) Disabled
• (1) Toggle Output
• (2) Momentary Output
50 Copyright © 2014 Linear LLC