Access To The Test Mode (With Program Switch S9, Position 5) - Kärcher BR 100 R Service Manual

BR/BD 100/250 R BP / RI
5.1.5 Access to the test mode
(with program switch S9, position 5)
Requirements
- Unit switched off
- Program switch (S9) in Pos 5 (polish)
- Key switch (SO) in „O" position
Main relay (K1)
switches off
Error display
?
Display
shutdown soon
Switch off key switch (SO)
Display
Battery:
Water/C:
Note:
- If the rotary pulse generator is turned in an anti-clockwise direction the cursor acts in the opposite direction, i.e. the menu is
called up from the last to the first parameter. The last saved cursor can be called up again after quitting the menu, e.g. by
switching back to the standard display (battery display).
- Switch off the key switch (S0) to quit test mode
Service Manual 08.2007
no
yes
Error display
E....F
E....F
Call up service/
operator menu
See 5.1.5.3
Adjust brush pattern
On-Off function or o-
pen/closed See 5.1.2.1
Drive pedal calibration
See 5.1.5.1
LED test
See 5.1.5.2
Basic settings and service procedures
- Hold i-button inch function
- Switch on key switch (SO)
BR 100/250R
no
Display
Main relay (K1)
no
>10s
yes
Call up service/
operator menu
Move BK
I_brush
Move BK
I_brush
Fan (on/off) 0
Magnet brake
open/closed
Calibrate accelerator
pedal?
lluminated symbol test
and
Display
Self-test
Self-test
o.k.?
yes
is connected
Display
Set TEST
MODE?
Display
AB
0A
AUF
0A
0mA
Page 83 / 171