Wet Scrubbing (With Suction) - Kärcher BR 100 R Service Manual

Unit functions

3.3.3 Wet scrubbing (with suction)

Initial startup
Shutdown procedure
Switch program switch to Pos. 2
- Suction motor (M4) „ON", lifting motor suction beam (M30) lowers suction beam if direction of travel switch (S2) switched to forwards
- If driving operation active (M1)
- Lifting motor lowers brush head (M20)
- Brush motors (M2, M3) start
- Water metering valve (Y2) opens
- Water pump (M5)
no
water quantity: IIIIII
no
Display (flashing)
water quantity: IIIIII
no
Display (flashing)
water quantity: II
Change value (+/-)
no
Display - water volume:
water quantity: II
new set value saved
no
Operator menu scrubbing displays
- Water volume: min ...max
- Chemical metering: min ...max
- Brush pressure
- FACT
- Brush after-run
- Working speed
- Quit info display
- Quit operator menu?
Page 58 / 171
Battery:
Water/C:
Battery:
Water/C:
yes
Display
yes
yes
yes
yes
(Adjustable when stopped)
(Adjustable when stopped)
(only adjustable in drive mode)
(Adjustable when stopped)
(Adjustable when stopped)
(Adjustable when stopped)
(Adjustable when stopped)
(Adjustable when stopped)
Display
E....F
E....F
Display
E....F
E....F
Drive motor (M1) active
Magnetic brake (Y1)
no
brush pressure:IIIIII
no
brush pressure:IIIIII
no
brush pressure: II
no
brush pressure: II
new set value saved
Note: i-Button
If the i-button is not pressed for longer
than 10 seconds the program
automatically switches back to:
BR/BD 100/250 R BP / RI
released
yes
Display
yes
Display (flashing)
Display (flashing)
Change value (+/-)
Display
Display
Battery/water
Service Manual 08.2007