Battery Charger - Kärcher BR 100 R Service Manual

Technical features
2.11

Battery charger

ATTENTION! Run unit in dry rooms only; protect against rain; to be opened by instructed qualified personel only.
1 Connecting plug (X1) with the battery
charger
2 Battery charger mains cable
3 Battery charger (6.654-155)
Page 24 / 171
BR/BD 100/250 R BP / RI
Operating instructions:
1. Connect charging cable with the battery.
Note battery polarity!
2. Plug mains plug into plug socket. Switch on unit;
(Euro plug 230V/50Hz; CE plug 400V/50Hz).
3. Green LED (HL) lit = unit charging;
4. Green LED (NL) lit = recharging mode;
5. Yellow LED (LE) lit = battery full; charge maintenance;
6. Red LED (ST) lit = FAULT;
Check battery connection;
Check battery polarity;
7. If mains switch not lit: check mains; (fuse)
1
2
3
Service Manual 08.2007