Operator And Service Program Overview - Kärcher BR 100 R Service Manual

Unit functions
3.2

Operator and service program overview

1 Driving
(without cleaning function)
2 Wet scrubbing
(with suction)
3 Wet scrubbing
(without suction)
4 Suction
(without scrubbing mode)
5 Polishing
(without suction)
6 Polishing
(with suction)
7 Hand cleaning
(without drive function)
with wall-ceiling-floor tool
Manufacture settings (see also Chapter 3.3.9)
Rotary function
Keying function
Inching function
Info button with functions
Page 52 / 171
– – – – – –
5 0 4 6 2 4
5 0 4 6 2 4
– – – – – 4
– – 4 6 0 4
– – 4 6 0 4
– – – – – –
BR/BD 100/250 R BP / RI
Operator functions:
The overview describes the operator functions
with the corresponding processes and access
to the information menu. The manufacture set-
tings for the operator functions are shown in the
chart. Further details are given in Chapter 3.3.9.
Service program overview
The service mode is available for the customer
service technicians to use for troubleshooting
and adjusting work.
The service mode consists of the testing mode
and the setup menu.
The service diagnosis function is not yet availa-
ble and will be introduced at a later date.
Note:
Access by selecting the menu items takes
place using the information button.
The info button symbols used (see figure):
Rotary function:
Key function:
Inching function:
Service Manual 08.2007
for selecting the menu.
for confirming the
menu selection.
for fine adjustment
(e.g. limit switch).