Table of Contents
Advertisement
Manual and Automatic Operation – Overview
3.1.1
Manually Using a Computer in the 10.x.x.x IP Address Range
You can set up the camera's network parameters using a browser and the embedded
camera software. To do so, connect the camera to a computer or network that is using a
10.x.x.x IP address range (see Section 3.2.1, «Manually Setting Up the Network Parameters
in a Browser» ). Afterwards, you can enter the camera's default IP address in the browser's
address bar on your computer (see
Section 3.2.2, «First Images and
the Most Important Settings in the
Browser» ). Next, click on the Admin
Menu button to open the camera's
Quick Installation in the browser's
user interface. This is where you
can configure the desired network
parameters of the camera. Once
you have completed the Quick
Installation, you can connect the
camera with its new network
parameters to the desired network.
Advantages
– The camera does not
need to be physically accessible, that is, it may already be installed.
– No additional software is required.
– The network parameters can be set flexibly through manual entry.
Disadvantages
– The computer or the network needs to operate in the 10.x.x.x IP address range
or need to be able to access such a network.
– The setup does not work automatically.
– You need to know the relevant network parameters.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
93
/144
The default IP address
of your camera is printed
on a sticker on the front
Advertisement
Table of Contents
