Manually Using A Computer In The 10.X.x.x Ip Address Range - Mobotix D15D Manual

Manual And Automatic Operation – Overview
3.1.1

Manually Using A Computer In The 10.x.x.x IP Address Range

You can set up the camera's network parameters using a browser and the embedded
camera software. To do so, connect the camera to a computer or network that is using a
10.x.x.x IP address range (see Section 3.2.1, «Manually Setting Up The Network Parameters
In A Browser» ). Afterwards, you can enter the camera's default IP address in the browser's
address bar on your computer (see
Section 3.2.2, «First Images And
The Most Important Settings In
The Browser» ). Next, click on the
Admin Menu button to open the
camera's Quick Installation in the
browser's user interface. This is
where you can configure the desired
network parameters of the cam-
era. Once you have completed the
Quick Installation, you can connect
the camera with its new network
parameters to the desired network.
Benefits
– The camera does not
need to be physically accessible, that is, it can remain mounted to a pole, for
example.
– No additional software is required.
– The network parameters can be set flexibly through manual entry.
Disadvantages
– The computer or the network needs to operate in the 10.x.x.x IP address range
or need to be able to access such a network.
– The setup does not work automatically.
– You need to know the relevant network parameters.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
77
/124
The default IP address
of your camera is printed
on a sticker on the
back of the camera