Manually Using A Computer In The 10.X.x.x Ip Address Range - Mobotix Q25M Manual

Manual and Automatic Operation – Overview
3.1.1

Manually Using a Computer in the 10.x.x.x IP Address Range

You can set up the camera's network parameters using a browser and the embedded
camera software. To do this, connect the camera to a computer or a network that is using a
10.x.x.x IP address range (see Section 3.2.1, «Manually Setting Up The Network Parameters In
A Browser» ). Once this has been completed, you can enter the camera's default IP address
in the browser's address bar of the
computer (see Section 3.2.2, «First
Images And The Most Important
Settings In The Browser» ). Next, click
on the Admin Menu button to open
the camera's Quick Installation in
the browser's user interface. This
is where you can configure the
desired network parameters of
the camera. Once you have com-
pleted the Quick Installation, you
can connect the camera with its
new network parameters to the
desired network.
Advantages
– The camera does not need to be physically accessible, that is, it may already
be mounted.
– No additional software is required.
– The network parameters can be set flexibly through manual entry.
Disadvantages
– The computer or the network needs to operate in the 10.x.x.x IP address range
or need to be able to access such a network.
– The setup does not work automatically.
– You need to know the relevant network parameters.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
111
/156
The default IP address
of your camera is printed
on a sticker on the front