Closing The Camera Housing - Mobotix M15 Manual

70
/144
M15 Camera Manual: Installation
After you have connected an MxBus module, you need to activate it in the camera's
browser interface (Admin Menu > Manage Hardware Expansions or Manage
MxBus Modules, respectively).

2.2.8 Closing the Camera Housing

Once you have completed the tasks in the interior of the M15, you need to reassemble
the front element of the M15. Make sure that you are reconnecting all plugs as shown in
the figure if you removed any of them:
Sensor module cable
right
Procedure
1. Before inserting the front element, make sure that
the sensor module cables of both image sensors
are running at the inside of the screw bore (see
The sensor cables must not run along
red arrow).
the outside of the screw bores (see figure below)!
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
Notes
www.mobotix.com • sales@mobotix.com
Sensor module cable
left
I/O cable to front ele-
ment (red clips!)