Mobotix M15 Manual page 53

Preparing the Installation
Wall mount
Wall installation
Central joint
The VarioFlex mount consists of a central joint, which is directly screwed into place with
the M15 housing, and a wall and ceiling mount, which is fastened to the central joint
with just one screw. In addition to being easy to install, the VarioFlex mount enjoys the
advantage of featuring completely concealed cabling and high impermeability to water
and dust (IP66). Wall and ceiling mounts are designed such that they can be installed
over conventional in-wall sockets (without the frame) or cavity sockets and conceal them
completely. A MOBOTIX interface box can be integrated in the wall mount.
Space for RJ45 in-wall socket/concealed cabling
Make sure that you have found the best camera position before installing the camera. It
is important that the camera's field of view is not obstructed in any way. Once the camera
has been installed on a wall or ceiling, you can fine-tune its position. If the monitored area
changes or the camera has to be installed in a different location, it is easy to exchange
the camera's sensor modules and continue using the camera, without having to upgrade
to new video software.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
+20°
-60°
Weather
protection
Ceiling mount
Ceiling instal-
360°
lation
53
/144
Tilting the camera when
installed on a wall
• Horizontal: 180°
• Vertical: -60° to +20°
Tilting the camera when
installed on a ceiling
• Horizontal: 360°
• Vertical: -90° to +17°
VarioFlex wall mount
with protected cabling
and cover for in-wall
sockets and MOBOTIX
interface boxes