Table of Contents
Advertisement
124
/144
M15 Camera Manual: Operating The Camera
6. In the Display Mode Quick Control, select the option Surround or Double Panorama.
You can fine-tune the views using the vPTZ via mouse or joystick and, as described
above, by unlocking and locking the standard view using the lock icon (open lock,
correct display and close lock again).
For each of the subviews ( North , East , etc.; see below), the OnScreen Control on the
side can be used to adapt it (open lock, click subview, adapt view, click next subview,
adapt view and close lock again).
Camera Images and Subviews of Camera Images
The M15D's ability to operate multiple sensor modules means that in double image display,
the live image's camera images (left, right) can be used for differing display modes.
Depending on the display mode selected for each camera image, this may be divided
into subviews :
2
Left camera image with three subviews
Panorama/Focus display mode
(for example, Cam1 sensor module)
When you click inside one of the subviews, this area is highlighted with a yellow frame.
All of the PTZ actions triggered by the mouse, joystick or OnScreen Control now only apply
to the highlighted subview.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
Note
Four subviews,
subview 1 highlighted (yellow frame)
1
3
Right-side camera image with a partial view
www.mobotix.com • sales@mobotix.com
4
Full image display mode
(for example, Cam2 sensor module)
Advertisement
Table of Contents
