Table of Contents
Advertisement
58
/144
The M15 supports Power-
over-Ethernet according
to IEEE 802.3af (PoE)
The PoE adapter replaces
the crossover cable
when directly connect-
ing to a computer
M15 Camera Manual: Installation
2.1.3 Network Connection and Power Supply, UPS
Power-Over-Ethernet (PoE Conforming to IEEE 802.3af)
All M15 models are supplied with power using the PoE standard. The PoE Adapter Set
(MX-NPA-PoE-Set) may be used for smaller installations, or the weatherproof PoE injector
MX-NPA-Box (MX-OPT-NPA1-EXT) may be used in outdoor scenarios. For larger installa-
tions, we recommend investing in a PoE-capable supply device available on the market.
Section 2.7 contains more information on the possible combinations of connecting the
M15 and power supply options.
LAN or Power
maximum length
The
of the network cable for power supply over an Ethernet cable is
100 m. The Mx2wire+ media converter set (available as an accessory) can be used to
extend the range of an Ethernet connection up to 500 m in length (maximum transmission
speed for a 500-m cable: 45 Mbps and 12 W for the PoE device).
The MOBOTIX M15 can be powered by switches or routers that support the PoE
(Power-over-Ethernet) standard and conform to IEEE 802.3af.
Advantages of PoE power supply:
• Centralized backup power supply available via network
• Lower, more cost-effective power consumption
• Camera does not require an additional network connection
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
PoE adapter
MX-NPA-PoE
Camera
Note
www.mobotix.com • sales@mobotix.com
PC or Power
Advertisement
Table of Contents
