Page 1
HiRes Video Innovations The German company MOBOTIX AG is known as the leading pioneer in network camera technology and its decentralized concept has made high-resolution video systems cost efficient.
Page 2
For more information, visit www.mobotix.com > Seminars. Copyright Information All rights reserved. MOBOTIX , the MX logo, MxControlCenter , MxEasy and MxPEG are trademarks of MOBOTIX AG registered in the European Union, the U.S.A., and other countries. Microsoft , Windows and Windows Server are registered trademarks of Microsoft Corporation.
Page 5
3.5.2 Formatting the MicroSD Card 3.5.3 Activating Recording 3.5.4 Accessing Data on the MicroSD Card 3.5.5 Deactivating Card Recording 3.5.6 Using a MicroSD Card in a Different MOBOTIX Camera 3.5.7 Limitations on Warranty When Using Flash Storage Media Configuration in the Browser 3.6.1 Overview 3.6.2 General Browser Settings...
MOBOTIX products. § Depending on national laws and the installation location of the M15, the recording of video and sound data may be subject to special documentation or it may be prohibited.
Page 7
Never touch the dome or the protective lens covers: Due to the high performance of the M15, the area of the image sensor can get quite hot, especially when the ambient temperature is also high. This does not affect the proper functioning of the camera in any way.
Page 8
With the M15, one or two separately available MOBOTIX sensors modules (lens plus sensor board and microphone) that can be replaced at any time are used in the M15 Core basic camera module. Twelve different sensor modules are available for the M15: Six focal lengths from telephoto to hemispheric, each available in day or night versions.
Caution: MOBOTIX in Use! It is clear from the outset that the M15 is an authentic MOBOTIX camera like its predeces- sor, the M12. It offers special advantages when a security camera looks like the real thing thanks to its unique, striking product design, which has stood for leading video technology and image quality for many years.
Page 11
Or even the serial number of a dollar bill from a distance of two meters. One M15 camera is usually all that is required to monitor either an entire room or the four lanes of a gas station. The high degree of image detail not only reduces the number of required cameras, but also minimizes system costs by reducing the wiring complexity, emergency power requirements, and number of recording devices required.
Page 12
The day and night lenses in the M15 are positioned exactly parallel to one another. This way, the day lens always covers the same area as the night lens.
Page 13
PoE standard IEEE 802.3af. Fast, Simple Installation The MOBOTIX M15 requires just one cable for data and power to connect to a PoE switch and thereby to any expandable Ethernet network.
Page 14
M15 Camera Manual: Product Overview Low Power Consumption in Accordance with the PoE Standard (IEEE 802.3af) A M15 uses no more power than its predecessor (typically 4.5 watts), despite the new sensor technology. Adjusting the PoE class via the camera software also enables the use of PoE switches that cannot be operated on all ports with PoE class 3 (up to max.
Panorama image at 1280x480 pixels Optimizing the Panorama Image The factory setting of an M15 with an L12 lens is a high-resolution panorama image, in which parts of the protective cover of the housing are still visible in the upper right and left corners of the image.
Page 16
No Blind Spots From Wall To Wall And From Floor To Ceiling Panorama Focus – One Camera, Three Views Maximum room overview while simultaneously viewing detail in a single image. The M15 is capable of providing two more views at the same time with the panorama, allowing you to focus on two scenes in parallel (“Panorama Focus”...
Page 17
In addition to the Panorama, Double Panorama, Panorama Focus, and Surround views, the M15 image may be displayed on a monitor as the original fisheye version (“Full Image” display mode) or as the camera-corrected image section (“Normal” display mode). Switching to one of the other display modes described is possible at any time.
The more light-sensitive an image sensor is, the better the image quality, especially when the ambient light level is low, such as at dusk and in heavy rainfall. The M15 offers the best MOBOTIX image quality that is currently available thanks to the light sensitivity provided by the five-megapixel color sensor that is four times higher than that of the previous three-megapixel color sensor.
Page 19
The system can easily be matched to suit the location’s requirements, thanks to a range of available sensor modules. You can change the sensor modules to modify the focal lengths at any time. New Features of the M15 Compared to the M12 at a Glance Comment Modular design M15 Core: Camera housing with front element;...
The M15 is also equipped with a shock detector as standard (for all IT and SEC models). For example, if the camera receives a blow to the housing, it can simultaneously take a video of the offender, trigger a sound alarm and notify the security company by a SIP call.
Page 21
/144 M15 AllroundDual MOBOTIX In the event of an alarm, M15 cameras can also record lip-synchronous audio. The cameras therefore play an important role in analyzing and clarifying a situation. Thanks to an integrated speaker and microphone, each individual camera can also be used for bidirectional communication (two-way video communication), so you can easily use the MOBOTIX App with your iPhone or iPad on the road.
Due to the special product and system properties, the decision to install MOBOTIX video systems is also a decision for Green IP Video: low power consump- tion and environmental friendly because of long life expectancy and minimal amount of materials involved.
This makes the cameras extremely robust and maintenance-free. M15D-Sec with All Sensor Modules 18 different MOBOTIX sensor modules are available for the M15D (each available in day, night and LPF versions): • L12 Fisheye with 180° horizontal field of view •...
Page 25
Another benefit is that you can easily set a 35 mm camera (analog or digital) to the same focal length as the MOBOTIX lens (Lxx) to obtain the same field of vision. This approach greatly facilitates lens selection.
Page 31
M.11 Security clip for sensor or blind modules, red Design of the MOBOTIX M15 The Base module of the MOBOTIX M15 consists of the camera housing with VarioFlex mount (wall or ceiling) and the front element. VarioFlex Wall Mount Camera housing...
Page 32
/144 M15 Camera Manual: Product Overview Connections of the MOBOTIX M15 The MOBOTIX M15 has the following connections that are accessible once the housing has been opened (see Section 2.2.2, «Opening the Camera Housing» ): MxBus Ethernet patch cable MiniUSB...
/144 Delivered Parts and Dimensions 1.3.2 M15D-Thermal Model Variant The delivered parts of the M15D-Thermal are slightly different from those of the M15 Core (see Section 1.3.1, «M15 Core (Base Module)» ): M.11 M.10 1.10 1.12 1.11 1.19 1.14 1.17 1.15...
M15 Camera Manual: Product Overview 1.3.6 M15D Kits “Day/Night” In order to facilitate the installation, you also order the M15 as complete kit with one day and one night lens of the same focal lengths. Available Combinations of Sensor Modules •...
M15 Order no.: MX-CBL-MU-EN-STR-05/2/5 (angled/straight) The MOBOTIX MX-232-IO-Box can be connected directly to the M15 with this cable, which is up to five meters long. 1.4.3 MiniUSB Cable to MiniUSB (Angled/Angled) Order no.: MX-CBL-MU-EN-EN-PG-05/2/5 (angled/angled) The MOBOTIX ExtIO can be connected directly to the M15 with this cable, which is up to five meters long.
Order no.: MX-Overvoltage-Protection-Box-LSA Weatherproof network connector (protection class IP65, –30 to +60°C/–22 to 140°F) with surge protection of up to 4 kV for MOBOTIX IP cameras , ideal for replacing the MX-Patch-Box. At the same time, the MX-Overvoltage-Protection-Box provides a weatherproof connection of a camera’s patch cable to a network patch cable ( -RJ45 variant) or a network installation cable ( -LSA variant).
D-Sub 15-HD connector. The MX-232-IO-Box (protection class IP65, –30 to +60°C/–22 to 140°F) can be attached to all MOBOTIX cameras with an MxBus or USB interface. The maximum length of the MxBus wiring (0.8 mm diameter wires) is 50 m/55 yd. If the MiniUSB connector is used, the maximum cable length is 5 m/16 ft.
The ExtIO is suitable for use as direct con- nection to the M15 via a MiniUSB cable (max. 5 m), which can be ordered separately, or as a network connection via the PoE switch.
Note that this is not possible when using the ceiling mount . 1.4.14 Other Accessories Since the range of accessories for the MOBOTIX system keeps growing, you should visit the MOBOTIX website www.mobotix.com in the Products > Accessories section to see the entire list of available accessories.
MOBOTIX remote stations MxControlCenter, MxEasy and MOBOTIX App. The M15 models therefore also feature a variety of functions that are integrated in the firmware: from motion detection and long-term storage right through to alarm notification via video IP telephony.
The state-of-the-art software, specifically tailored to support high-resolution MOBOTIX network cameras, provides a user-friendly user interface and camera image display, convenient video search functions, effective alarm handling, automatic camera integra- tion, video storage on file servers as well as useful configuration and update wizards.
MOBOTIX Software 1.5.4 MOBOTIX App Premium solution: There for you whenever and wherever you need it, the MOBOTIX App serves as the perfect mobile remote station that uses intelligent detailed solutions to increase security and convenience for users on a daily basis. The controls are optimized...
M15 Camera Manual: Installation INSTALLATION The MOBOTIX M15 has been designed to be mounted on walls and ceilings. It can also be installed on a mounting pole using the appropriate MOBOTIX accessories. The different installation options are described in Section 2.3, «Mounting the Camera with Wall Mount»...
Page 53
The VarioFlex mount consists of a central joint, which is directly screwed into place with the M15 housing, and a wall and ceiling mount, which is fastened to the central joint with just one screw. In addition to being easy to install, the VarioFlex mount enjoys the advantage of featuring completely concealed cabling and high impermeability to water and dust (IP66).
Page 54
M15 Camera Manual: Installation Wall Installation The M15 can be installed on the wall of a building or structures, even mobile surfaces, for both indoor and outdoor use. The camera is mounted using the pre-installed VarioFlex mount (supplied as standard), which is easily secured using the four enclosed screws and screw anchors (depending on the surface, it can also be mounted without screw anchors directly over the in-wall socket).
Installation on round poles is frequently used for cameras that are intended for mobile outdoor use (for example, surveillance of construction sites). For this purpose, MOBOTIX recommends using the pole mount, which is available for the M15 as an accessory and is almost indestructible (MX-MH-SecureFlex-ESWS). This pole mount is made from rust- proof stainless steel with a white coating and is used in combination with the pre-installed VarioFlex mount supplied as standard with the wall mount.
Page 57
Note Part of the captured image area is concealed behind the protective cover of the M15 housing, especially in the full image. For this reason, M15 cameras with L12 lens should be adjusted so that the concealed areas are not those that are supposed to be monitored.
M15 Camera Manual: Installation 2.1.3 Network Connection and Power Supply, UPS Power-Over-Ethernet (PoE Conforming to IEEE 802.3af) All M15 models are supplied with power using the PoE standard. The PoE Adapter Set The M15 supports Power- over-Ethernet according (MX-NPA-PoE-Set) may be used for smaller installations, or the weatherproof PoE injector to IEEE 802.3af (PoE)
5 watts is very low. This, in turn, means that you can centralize the UPS-protected power supply by injecting power into the Ethernet cables (max. 100 m). This kind of protected power supply can be used either with MOBOTIX PoE products (MX-NPA-PoE + Universal Power Supply) or with PoE-compliant switches according to IEEE 802.3af.
When installing the wiring inside or outside of buildings, make sure you always adhere to the relevant regulations on wiring, fire prevention, and protection against lightning. MOBOTIX cameras are protected against the effects of small electrical surges by a range of measures. These measures, however, cannot prevent the camera from being damaged when stronger electrical surges occur.
Using One or Two Sensor Modules With an M15, you have the choice of using the camera with one or two sensor modules. Since the modules are easily exchanged, it is also possible to add a module or to use MOBOTIX Tutorials: different ones later on.
Repeat steps 3 to 6 for the second sensor module or the blind module, respectively. Installing the blind module is a mandatory prerequisite when using the M15 as a mono camera with only one sensor module. Caution...
2.2.3 Installing the Security Clips (Optional, Not Required for M15D Kits) The security clips are protecting the sensor modules or the blind module in the front element of the M15 against unwanted rotation (e.g., due to vibration when mounted on a pole or in an automotive scenario).
Section 2.2.8 . 2.2.5 Replacing the Ethernet Patch Cable If you want to replace the pre-installed MOBOTIX patch cable (0.5 m/20 in) by a longer one, make sure that you only use genuine MOBOTIX cables (see Section 1.4.5, «Ethernet Patch Cable for Bayonet Catch»...
Using the USB plug (red circle in figure), you can attach existing expansion modules, such Only use USB cables with angled plugs as the MOBOTIX ExtIO (USB), the MX-232-IO-Box or external USB hard drives to the camera for connecting USB in a weatherproof and well-protected manner.
/144 First Installation Steps 2.2.7 Connecting a Two-Wire MxBus Cable You can use such a cable to connect additional MOBOTIX modules (e.g., the MX-GPS-Box or the MX-232-IO-Box) to the M15. Note that you can attach two MxBus cables (each having...
Once you have completed the tasks in the interior of the M15, you need to reassemble the front element of the M15. Make sure that you are reconnecting all plugs as shown in the figure if you removed any of them:...
M15 Camera Manual: Installation Mounting the Camera with Wall Mount The M15 is an allround camera designed for use in indoor and outdoor applications. The camera must always be installed with the VarioFlex mount, which has been prepared at the factory for wall mounting and allows the cabling to be concealed. The best camera position for the selected lens must be found before installing the camera on the wall (see Section 2.1.1, «Installation Options: Wall, Ceiling, Pole»...
Page 73
MX-Patch-Box that can easily be inserted into the cavity socket of the wall mount (VarioFlex MX-Patch-Box in mount). For more information on the MX-Patch-Box, please visit www.mobotix.com and the wall mount go to the Products > Accessories > Interface Boxes section. It is also possible to install an in-wall socket with RJ45 connector.
M15 Camera Manual: Installation Mounting the Camera with Ceiling Mount The M15 is an allround camera designed for use in indoor and outdoor applications. The camera is always installed together with the VarioFlex mount, which is shipped as a wall mount, but can be converted to a ceiling mount in just a few steps.
M15 Camera Manual: Installation Mounting the Camera with Pole Mount (Accessories) If you are intending to install the camera on a pole, you should consider using the MOBOTIX M15 pole mount. This mount is made of 3-mm powder-coated stainless steel (white) and has been designed specifically for outdoor use.
Page 83
MX-Patch-Box. All manuals can be downloaded and printed (as PDF files) from the MOBOTIX website (www.mobotix.com) in the Support > Manuals sec- tion. Make sure that the cables are not bent or squashed.
The camera must be taken down to remove, insert, or replace a MicroSD card in use. To avoid data loss, be sure to deactivate MicroSD card recording in the camera software and reboot the MOBOTIX camera before removing the card. Caution A MicroSD card may only be removed from the camera after you have deactivated recording to the SD card and rebooted the camera.
• If you are using IEEE 802.3af or IEEE 802.3at (PoE+) Power-over-Ethernet network components to supply power to MOBOTIX cameras, make sure, if possible, that these components do not have a fan. Since the power consumption of MOBOTIX cameras is very low compared to other products, the reliability of the entire system is increased, thus extending the life of these components.
Box is available at www.mobotix.com under Products > Accessories > Interface Boxes. Insert the MOBOTIX patch cable of the M15 into the network port for standard connections (only permitted in indoor areas). If additional cables are required inside the housing, they must be connected as described in Section 2.2.6, «Connecting a USB Cable»...
(for example, 10.8.0.99). However, local computer networks usually have IP addresses in the 172 or 192 ranges. In order to access a MOBOTIX camera via the network, the camera needs to obtain an IP address in the same address range. You can set up the network parameters of the MOBOTIX camera using one of the following methods: Manually, using MxCC and MxEasy or by DHCP.
MxControlCenter or MxEasy (see Section 3.2.3 and Section 3.2.4 ). You can also use one of these applications to automatically configure the network parameters of MOBOTIX cameras that are not operating on the same IP address range as the computer.
M15 Camera Manual: Operating The Camera First Images and the Most Important Settings Once the MOBOTIX camera has been connected to the network, you need to set up the camera’s network interface accordingly. This step involves setting up and checking the network parameters of the camera.
Page 97
2. Set Up the Target Network Parameters of the MOBOTIX Camera: 1. Open a web browser on the computer and enter the default IP address of the MOBOTIX camera in the address bar of the browser (for example, 10.8.0.99). Pressing Enter displays the user interface of the MOBOTIX camera (see also Section 3.2.2, «First...
3.2.2 First Images and the Most Important Settings in the Browser Once the MOBOTIX camera has been connected to the power supply and to the network, you can access the user interface with the live camera image in the web browser. Internet Explorer, Firefox, Safari or any other graphical browser with activated JavaScript is suitable.
M15 Camera Manual: Operating The Camera 3.2.3 First Images and Network Parameter Configuration in MxControlCenter Installation Download the setup file from the MOBOTIX website to install the latest version. The latest Download versions are available at www.mobotix.com in the Support > Software Downloads >...
Page 101
The Add Video Sources dialog box appears and the application automatically searches for MOBOTIX cameras in the local network when you launch the program for the first time. Select Video Source > Add from the menu to perform a camera search at a later time.
Page 102
For more information, see section «Creating a New Layout» . Reconfiguring Cameras in a Different Subnet If one or more MOBOTIX cameras are displayed with the status Different subnet (for example, cameras with a factory IP address), MxControlCenter automatically offers to configure the network settings of the cameras.
Page 103
MxControlCenter • Camera: Here, you can enter the known IP address or DNS name of a MOBOTIX camera or a third-party IP camera if it was not found by the automatic search feature.
When you start MxEasy for the first time on a computer, the MxEasy Wizard automatically begins to search for MOBOTIX cameras and displays all the cameras found in a list. The camera list will be updated automatically as soon as new MOBOTIX cameras are con- nected to the local network or removed from the network.
Page 106
M15 Camera Manual: Operating The Camera Reconfiguring Network Addresses of Cameras Using Bonjour*, MxEasy not only finds cameras on the same network as your computer, it also finds MOBOTIX cameras located in other subnets (status Invalid network). In such a *Bonjour: automatic recognition of network...
Page 107
MxEasy Assistant until the main window appears. If one of the integrated cameras includes an M15 with Hemispheric lens, the MxEasy Assistant opens an additional page where you can specify the mounting positions ( Ceiling, Wall, Floor ) and display modes ( Panorama, Surround, etc.
3.2.6 Starting the Camera with an Automatic IP Address (DHCP) If your network has a DHCP server, you can start the MOBOTIX camera with DHCP support. The camera automatically obtains an IP address from the DHCP server and announces the new network data.
To do so, use the blue lens wrench and the black module wrench (both are supplied with the M15 basic module). The focusing aid provides a visual aid when correcting the image sharpness (see The Live Screen of the MOBOTIX Camera in the camera’s online help).
M15 Camera Manual: Operating The Camera 3.3.3 Inserting a Filter MOBOTIX offers a polarization filter in its range of accessory products for all sensor mod- ules (except the L12). The polarization filter prevents unwanted reflections from smooth surfaces. The filter can be used to provide better facial recognition of the people behind the windshield of a car, for example.
Operation Using the Mouse and Scroll Wheel The vPTZ function of the M15 can be controlled in the browser using the mouse. This position becomes the new image center by clicking any position on the image displayed on the monitor. The image moves accordingly and the image distortion is automatically corrected.
Page 114
The PTZ Features» and the MxControlCenter manual in Section 2.4.6, «Using The vPTZ Features» and Section 3.1.4, «PTZ Controls In The Sidebar Panel» . Current versions of all manuals can be downloaded anytime from the MOBOTIX website (www.mobotix.com) under Support > Manuals.
The main advantage of full image recording lies in the special functionality of the M15, in that it can always maintain availability of a maximum size (full) image for later investigation, despite vPTZ actions carried out on the live image.
. To store the changed sensor configuration in the camera, proceed as described at the end of Section 3.4.3, «Special M15 Configuration in the Browser» . Configuration of the M15 Basic Parameters for Hemispheric Sensor Modules Thanks to its hemispherical lens, the MOBOTIX M15 provides certain special configuration options for the image settings.
Page 121
Virtual PTZ and Full Image Recording Caution To permanently save the standard image setting defined for the M15, go to the Store Complete Configuration option in the Manage Settings Quick Control. The settings will then remain in effect, even after rebooting.
Page 125
(Admin Menu > System Messages; see Section 3.4.3, «Special M15 Configuration in the Browser» . • Adding/switching on sensor modules: This is where you can re-enable deactivated modules.
Menu > Camera Status dialog box. Conservative Memory Usage Thanks to MOBOTIX MxFFS File System MxFFS formatting of the MicroSD card means that the MOBOTIX camera software will use the flash device as evenly as possible, thus allowing for the maximum possible number of write/delete cycles.
MxFFS-formatted). The following steps are necessary to format a storage device Server/Flash Device (Admin Menu > Storage on External File Server/Flash Device): 1. Make sure that there is a MicroSD card in the card slot of the MOBOTIX camera. 2. Click Format in the SD Memory Card line.
External File Server/Flash Device 1. Make sure that there is a MicroSD card in the card slot of the MOBOTIX camera. 2. Make sure that the MicroSD card is formatted in MxFFS format. 3. Activate the SD Memory Card option.
• In MxControlCenter: Play back the recorded video sequences with sound by access- ing the MicroSD card in the MOBOTIX camera via the camera or by directly accessing the MicroSD card via a card reader connected to the computer. Access the card by setting the MicroSD card’s drive/volume as a Directory in MxControlCenter.
This is limited to 4 MB of lost data per incident due to MxFFS formatting. 3.5.6 Using a MicroSD Card in a Different MOBOTIX Camera A MicroSD card containing recorded data from a MOBOTIX camera can be inserted into any MicroSD card-enabled MOBOTIX camera. Once MicroSD card recording has been activated (requires a reboot), the “new”...
HTTP commands using programs and scripts of the embedded software. The settings are stored in the camera’s flash memory. This section contains an overview of the general browser settings of the MOBOTIX camera, as well as further configuration options. Detailed information on the software functions is provided in the camera’s online help.
MOBOTIX camera. The camera can use either NTP servers or Time Protocol servers. For more information on this topic, refer to the online help for the specific dialog boxes.
(Image Programs Quick Control). • Set the resolution of the live image: By factory default, all MOBOTIX cameras are delivered with an image resolution of 640 x 480 pixels. You can select the desired resolution using the Resolution Quick Control.
Action Group Overview dialog box. • Activate shock detector: The M15 is also equipped with a shock detector as standard (for all IT and Secure models). If, for example, the camera’s housing receives a blow, it automatically registers it and sends a notification via an IP Notify or telephone call.
M15 Camera Manual: Operating The Camera Additional Notes 3.7.1 Operation with Only One Sensor Module If the MOBOTIX M15 is used with only one sensor module , the blind module needs to be installed (item 1.4 in Section 1.3, «Delivered Parts and Dimensions» )! If this is not the case, the camera must not be used (see Section 2.2.1, «Initial Installation of the Sensor...
Text and logos can be also deactivated or and the MOBOTIX logo at the top of the image. Once the camera arming has been acti- individually configured vated, the text at the bottom of the live image (event, action, messaging and recording symbols) will also appear.
M15 Camera Manual: Operating The Camera 3.7.8 Deactivating the Camera Reboot By factory default, the MOBOTIX camera automatically reboots once a week between 3 a.m. and 4 a.m. The reason for this is that in some rare cases, external influences (for example, radiation at high altitudes) can sometimes lead to camera malfunctions. The automatic reboot will refresh the camera’s memory and will ensure proper operation...
MOBOTIX products. Depending § on national laws and the installation location of the M15, the recording of video and sound data may be subject to special documentation or it may be prohibited. All users of MOBOTIX products are therefore required to familiarize themselves with all valid regulations and comply with these laws.
Never touch the dome or the protective lens covers: Due to the high performance of the M15, the area of the image sensor can get quite hot, especially when the ambient tem- perature is also high. This does not affect the proper functioning of the camera in any way.
3.7.16 Disclaimer MOBOTIX AG does not assume any liability for damage that is the result of improper use of its products or failure to comply with the operating manuals or the applicable rules and regula- tions.
/144 Manufacturer To demonstrate our confi dence in the quality of our products, MOBOTIX cameras have been used to capture all images that appear in this manual. Manufacturer MOBOTIX AG Kaiserstrasse 67722 Langmeil Germany Phone: +49 6302 9816-103 Fax: +49 6302 9816-190 www.mobotix.com...
Page 144
HiRes Video Innovations The German company MOBOTIX AG is known as the leading pioneer in network camera technology and its decentralized concept has made high-resolution video systems cost efficient.