Adjusting Camera, Lens Focus And Installing Filters; Adjusting The Camera - Mobotix M15 Manual

110
/144
Section 3.4 provides
more details and informa-
tion on the functionality
of the OnScreen Control
Correcting the image
horizon:
Rotate image to the left
Rotate image to the right
M15 Camera Manual: Operating The Camera
3.3

Adjusting Camera, Lens Focus and Installing Filters

3.3.1 Adjusting the Camera

1. The live image from the camera is displayed on the computer monitor.
2. Loosen the screws on the VarioFlex mount
using the supplied Allen wrench so that you
can easily turn and tilt the camera.
3. Display the desired camera section on the
computer monitor, then turn and tilt the cam-
era until you have found the best position and
sharpness. Retighten the screws of the VarioFlex
mount to prevent the position of the camera
from changing.
4. If required, clean the lens using a clean, lint-free
cotton cloth.
Correcting the Image Horizon (For L12 Sensor
Module Only)
The M15-Sec with hemispheric L12 sensor module
allows the correction of an uneven image horizon
via OnScreen Control that was possibly caused by
the installation position. The image horizon is turned
by up to 30 degrees clockwise or counterclockwise
and can be optically restraightened by clicking the
icons (see image).
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
+30°
-30°
+/- 30°
www.mobotix.com • sales@mobotix.com