Mounting The Camera With Ceiling Mount; Varioflex Ceiling Mount - Mobotix M15 Manual

76
/144
Tilting the camera when
installed on a ceiling
• Horizontal: 360°
• Vertical: 107°
M15 Camera Manual: Installation
2.4

Mounting the Camera with Ceiling Mount

The M15 is an allround camera designed for use in indoor and outdoor applications. The
camera is always installed together with the VarioFlex mount, which is shipped as a wall
mount, but can be converted to a ceiling mount in just a few steps. The best camera position
for the selected lens must be found before installing the camera on a ceiling, an overhang
or balcony (see Section 2.1.1, «Installation Options: Wall, Ceiling, Pole» and Section 2.1.2,
«Installing the Camera with Hemispheric Sensor Modules» ). You can fine-tune its position
once the camera has been installed on the ceiling.

2.4.1 VarioFlex Ceiling Mount

Using the VarioFlex ceiling mount, the camera can be precisely panned, both horizontally
and vertically, to suit the area that is to be monitored.
When installed on a ceiling, the camera can be turned or tilted as follows:
• horizontally: 360°
• vertically: 107°
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
+17°
-90°
www.mobotix.com • sales@mobotix.com
360°