Table of Contents
Advertisement
120
/144
Lock open
Click the icon
Camera live image
with
panorama correction with
OnScreen Control visible
M15 Camera Manual: Operating The Camera
2. Click the lock icon. Clicking the lock once opens it (lock clasp is raised). The lock
prevents execution of later vPTZ actions, which could also unintentionally modify
the view you configure. This applies to all overview display modes, that is, also to
Panorama/Focus, Double Panorama and Surround.
3. A new icon for processing the panorama image appears in the top left corner
of the camera image. Enlarge the image by clicking the icon once (OnScreen Control
appears).
4. Using the OnScreen Control visible in the live camera image, you can now change
the displayed live camera image as desired (panning, tilting, zooming, rotating
and panorama correction). See figure on the right. When doing so, the vPTZ func-
tion using the mouse or joystick is deactivated. In case of a M15D with two sensor
modules, click the corresponding camera image (right/left) to edit it (highlighted
with a yellow frame).
5. After you have modified the desired setting, close the control panel ("x" in the top
left hand corner).
6. Click the lock icon again to close it (lock clasp is down). The panorama image
setting is then locked until the camera is next restarted.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
Advertisement
Table of Contents
