Table of Contents
Advertisement
106
/144
*Bonjour: automatic
recognition of network
services in IP networks
M15 Camera Manual: Operating The Camera
Reconfiguring Network Addresses of Cameras
Using Bonjour*, MxEasy not only finds cameras on the same network as your computer, it
also finds MOBOTIX cameras located in other subnets (status Invalid network). In such a
case, you would not be able to establish any connection to cameras in a different network
or subnet (without going into much further detail regarding TCP/IP network configurations).
This is possible, for example, when a camera with a factory IP address is connected to
a network in which a DHCP server automatically assigns the IP addresses. MxEasy can
automatically configure such a camera so that it is "integrated" into your existing network.
To do so, you only have to select the affected camera in the list and then click Continue.
After a security prompt, a new dialog box for configuring the selected camera is displayed.
If your computer automatically obtains its IP address from a DHCP server, then this is
certainly the best choice for that specific camera and most likely for all other cameras that
have been found in a different subnet (Get IP address automatically option).
If you have assigned a static IP address to your computer, you will probably want to assign
static IP addresses (issued by your system administrator) to every camera (the Use this
IP address option). Normally, you enter the same configuration used for the network
settings of your computer.
When you click OK, the selected cameras are automatically reconfigured and they are
located in the same subnet as the computer.
Integrating and Displaying Cameras
After a camera has been reconfigured, it has the status Accessible and can be integrated
into MxEasy. The MxEasy Assistant then displays the Define integration mode in MxEasy
dialog box.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
Advertisement
Table of Contents
