Table of Contents
Advertisement
Virtual PTZ and Full Image Recording
Wall-Mounted: Setting and Correcting the Standard View "Panorama"
High-resolution 180° panorama
1. In the Display Mode Quick Control, select the Panorama option. Examine the image
that is now displayed. If the section meets your expectations, no further adjustment
is necessary, and panorama configuration is complete. To change the image section
to meet your specific expectations, continue with step 2.
The currently visible image section may differ from the desired image section due
to the installation position or any accessories in use, for example. However, it is not
necessary to physically move the camera, as in this case the browser alone can
be used to adjust the visible panorama image by zooming, panning and tilting.
Tilted vertical lines may also be optically straightened to the image edges using the
panorama correction function. These tilted lines are primarily caused if the camera
or sensor module is tilted (for example, due to mounting with 15° wedges) or if the
image tilt is modified.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
Note
119
/144
Camera live image with
panorama correction
Camera live image
with-
outMOBOTIX panorama
correction with Quick
Controls visible
Advertisement
Table of Contents
