Automatically Using Mxcontrolcenter Or Mxeasy - Mobotix M15 Manual

94
/144
Download the free-
of-charge MxEasy
and MxControlCenter
software at
www.mobotix.com
M15 Camera Manual: Operating The Camera

3.1.2 Automatically Using MxControlCenter or MxEasy

You can set up the camera's network parameters using the free video management
software MxControlCenter or MxEasy (see Section 3.2.3 and Section 3.2.4 ). You can also
use one of these applications to automatically configure the network parameters of MOBOTIX
cameras that are not operating on the same IP address range as the computer.
Advantages
– You can connect the camera directly to the target network.
– The camera does not need to be physically accessible, that is, it may already
be installed.
– The camera can be configured to automatically receive an IP address (optional).
– The network parameters can be manually set (optional).
– You do not need to access the camera software.
Requirement
– Either MxControlCenter or MxEasy must be installed on the computer.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com