Connecting A Usb Cable - Mobotix M15 Manual

68
/144
Only use USB cables
with angled plugs
for connecting USB
cables to the M15!
M15 Camera Manual: Installation

2.2.6 Connecting a USB Cable

Using the USB plug (red circle in figure), you can attach existing expansion modules, such
as the MOBOTIX ExtIO (USB), the MX-232-IO-Box or external USB hard drives to the camera
in a weatherproof and well-protected manner.
Procedure
1. Open camera housing: Open the camera housing
as described in Section 2.2.2 .
2. Remove the single wire plug : Remove the blue
single wire plug (red circle in figure).
3. Guide the USB cable through the housing : Guide
the cable from the front through the cable guide
in the hinge of the VarioFlex mount (see figure).
4. Connect the USB cable : Insert the MiniUSB plug into
the appropriate connector. Apply bayonet catch as
shown and turn it clockwise until it gently snaps shut.
5. Close camera housing: Close the camera housing
as described in Section 2.2.8 .
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com