Mobotix M15 Manual page 54

54
/144
Wall installation
• Horizontal: 180°
• Vertical: -60° to +20°
M15 Camera Manual: Installation
Wall Installation
The M15 can be installed on the wall of a building or structures, even mobile surfaces, for
both indoor and outdoor use. The camera is mounted using the pre-installed VarioFlex
mount (supplied as standard), which is easily secured using the four enclosed screws
and screw anchors (depending on the surface, it can also be mounted without screw
anchors directly over the in-wall socket). The Ethernet connection cable of the camera
has already been guided through the mount and simply needs to be connected with the
network cable on-site (for example, using the MX-Patch-Box). By adjusting the VarioFlex
mount as required, the captured image area can be precisely adjusted to the desired
practical application. The camera can be turned or tilted 180° horizontally and 80°
vertically (from -60° to +20°).
Ceiling Installation
By exchanging the wall mount for the separately supplied ceiling mount, the M15 is ready
to be installed on ceilings in just a few easy steps thanks to the VarioFlex system. This
installation option is of particular benefit when monitoring rectangular rooms with a single
camera. In such cases, the L25 sensor module with Super Wide-Angle lens allows the
room to be monitored almost entirely by an M15 installed on the ceiling in one of the
corners. Using the PTZ software, you can easily zoom in on image details in either the
live image or the recording. The camera can be turned or tilted 360° horizontally and
107° vertically (from -90° to +17°).
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
Wall installation
+20°
-60°
Ceiling instal-
360°
lation
www.mobotix.com • sales@mobotix.com