Table of Contents
Advertisement
Virtual PTZ and Full Image Recording
To permanently save the standard image setting defined for the M15, go to the Store
Complete Configuration option in the Manage Settings Quick Control. The settings
will then remain in effect, even after rebooting.
Functions of the M15's OnScreen Control
Close
Start panning to the left
Default setting
To use the OnScreen Control, click the arrows in the top area for shifting the image sec-
tion. In the bottom areas, which are displayed when needed, click to the left and/or right
of the center point.
The same applies to every area: The further away that you click from an area's center
point, the greater the change triggered. To reset an area, click its center point again.
During panorama correction, clicking between the two trapezoid symbols straightens the
left or right tilting lines, which are best visible at the edges of the image section.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
Caution
Tilt up
Start panning to the right
Tilt down
Zoom
Panorama correction
Image tilt correction
121
/144
Depending on the instal-
lation position (ceiling,
wall, floor), panorama
correction and image
tilt correction may
not be available
Bring columns together
at the
top
(neces-
sary to correct the
example on the left)
Bring columns together
at the
bottom
Advertisement
Table of Contents
