Ctm/Gatm (4 And 8 Port) Module - Avaya BCM50 User Manual

BCM50 System Start Up
Attribute Value
Attribute Value
Clock Primary
source External
Secondary
External
Internal
Overlap: <check box>
receiving
Overlap: 0-10
length
Note: This parameter appears only when Overlap receiving is enabled.
Example:
Public received number = 4502303
Target line received numbers = 303
Local number length = 7
Public received number length = 3
Thus the first four digits are deleted by the system.
Send Name <check box>
Display
(ETSI QSIG
only)

CTM/GATM (4 and 8 port) Module

1. Double click in the Configured Device field and set it to either
CTM8/GATM8 or CTM4/GATM4 depending on which module is
required.
56
Description
Description
Primary External - uses clock from PSTN
Secondary External - used if system has more than one Loop
Internal - uses clock on BCM
Supports target lines in markets which use Overlap receiving signaling on
the BRI trunks. Overlap receiving must be configured for each BRI loop.
Set the local number length for loops to interfaces that receive overlap
rather than enbloc digits. This number is the total length of the called party
number received. This number is used to calculate the number of leading
digits that need to be removed by the system.
If the switch allows outgoing name display, select the check box.
NN40010-318 Issue 1.2 BCM50 Rls 6.0