Table of Contents
Advertisement
ABM-4082
6.3.7
TRIGger Subsystem
The Trigger subsystem is made up of a series of commands and subsystems to configure the Trigger model.
These commands and subsystems are summarized in Table 6-7
Command
:INITiate
[:IMMediate]
:CONTinuous <b>
:CONTinuous?
:ABORt
:TRIGger
:SOURce <name>
:SOURce?
:DELay <n>
:AUTO <b>
:AUTO?
:DELay?
:COUNt <n>
:COUNt?
:SAMPle
:COUNt <NRf>
:COUNt?
:INITiate commands
[:IMMediate]
Command Syntax:
:INITiate[:IMMediate]
Description:
This command takes the Model DMM out of the idle state. After all programmed operations are
completed, the instrument returns to the idle state if continuous initiation is disabled; (see next
command).
:CONTinuous <b>
Command Syntax:
:INITiate:CONTinuous <b>
Command parameter:
<b> =
0 or OFF
1 or ON
Query:
88
Table 6-7
TRIGger Command Summary
Function Description
Subsystem command path
Initiate one trigger cycle.
Enable or disable continuous initiation.
Query continuous initiation.
Reset trigger system
Select control source
Query control source
Set delay time
Enable or disable auto delay
Query state of delay
Query delay
Set measure count
Query measure count
Specify sample count
Query sample count
Control continuous initiation
Disable continuous initiation
Enable continuous initiation
Default
IMMediate
0
OFF
infinite
1
Advertisement
Table of Contents
