Aktakom ABM-4082 User Manual page 82

ABM-4082
select the most sensitive current or voltage threshold range.
:DIODe Command
:RANGe[:UPPer] <NRf>
Command syntax:
[:SENSe[1]]:DIODe:CURRent:RANGe[:UPPer] <NRf>
Command parameter:
<NRf> = 1 (1 mA)
10 (10μA)
100(100μA)
Query:
[UPPer]?
Description:
There are three current ranges available for the diode test: 10μA range, 100μA range and 1mA range.
Range is selected by using this command to specify one of the above current range for the diode under
test.
:CONTinuity Command
:THReshold <n>
Command Syntax:
[:SENSe[1]]:CONTinuity:THReshold <NRf>
Command parameter:
<NRf> = 1 to 1000
Query:
:THReshold?
Descriptoin:
This command is used to specify the threshold resistance for the continuity test. Continuity occurs
when the measurement is less than or equal to the specified threshold level.
82
Specify diode test current to 1mA
Specify diode test current to 10μA
Specify diode test current to 100μA
Query selected range
Specify threshold in ohms
Query threshold resistance
Specify current range for diode test