Aktakom ABM-4082 User Manual page 68

ABM-4082
Description:
This command is used to specify the format for the CALC2 math calculation. The calculation operations
for CALC2 use data stored in the buffer.
With NONE selected, no CALC2 calculation is performed. With any of the other formats selected and
CALC2 enabled, the math calculation will be performed every time the :IMMediate or :IMMediate?
Command is executed.
:STATe <b>
Command syntax:
:CALCulate2:STATe <b>
Command Parameter:
<b> = 0 or OFF
1 or ON
Query:
:STATe?
Descriptioon:
This command is used to enable or disable the CALC2 calculation. When enabled, the selected CALC2
format will be calculated when the :IMMediate or :IMMediate? Command is executed.
:DATA?
Command syntax:
:CALCulate2:DATA?
Description:
This query command is used to read the result of the CALC2 calculation. If CALC2 is disabled or
NONE is selected, the "raw" reading will be read.
:CALCulate3
These commands are used to configure and control the CALC3 limit test.
:LIMit[1]:UPPer <n>
:LIMit[1]:LOWer <n>
Command syntax:
:CALCulate3:LIMit[1]:UPPer <n>
:CALCulate3:LIMit[1]:LOWer <n>
Command Parameter:
<n> = -100e6 to 100e6
DEFault
MINimum
MAXimum
68
Disable CALC2 calculation
Enable CALC2 calculation
Query state (ON or OFF) of CALC2
Specify upper limit
Specify lower limit
Specify limit value
Specify upper limit to 1
Specify lower limit to -1
Specify limit to -100e6
Specify limit to +100e6