Table of Contents
Advertisement
ABM-4082
5.3.2
GPIB Interface Capability
Table 5-3 lists the DMM's GPIB capabilities and functions. These functions provide the mean for an
instrument to receive, process, and transmit commands, data, and status over the GPIB bus.
Code
SH1
AH1
T5
L4
RL1
DC1
DT1
C0
E1
5.3.3
GPIB Addressing
Model DMM multimeter ships from the factory with a GPIB address of 8. You can set the address to a value
of 0 to 30 and the address is saved in the non-volatile memory. Do not assign the same address to another
device or a controller that are on the same GPIB bus system.
Perform the following steps to set the GPIB address of Model DMM multimeter:
Press Shift →
1.
2.
Use
or
displayed.
3.
Press
to move down to the command level within the I/O MENU, "1: GPIB ADDR" will be
displayed.
4.
Use
and
or decrement the digits. Enter an expected value for GPIB address (from 0 to 31).
5.
Press Auto (ENTER) to confirm the address. The message "CHANGE SAVED" will be displayed to
54
Figure 5-4
Typical GPIB System Interconnection
Table 5-3
GPIB interface Capability
Complete Source Handshake capability
Complete Acceptor Handshake capability
Basic Talker; Talk-Only; Unaddressed if MLA; no serial poll.
Basic Listener; Unaddressed if MTA; no Listen Only.
Remote/Local capability
Device Clear capability
Device Trigger capability
No controller capability
Drivers are open-collector
to enter the menu on the menu level, "A: MEAS MENU" will be displayed.
key to move across to the I/O MENU on the menu level, "E: I/O MENU" will be
keys to choose a numerical place and use
Function
and
keys to increment
Advertisement
Table of Contents
