Aktakom ABM-4082 User Manual page 65

Use these commands to configure and control MXB and percent math calculations.
:FORMat <name>
Command syntax:
:CALCulate[1]:FORMat <name>
Command Parameter:
<name> = NONE
MXB
PERCent
Query:
:FORMat?
Description:
This command is used to specify the format for the CALC1 math calculations. With NONE selected, no
CALC1 calculation is performed. With MXB or PERCent selected and enabled, the result of the
calculation is displayed. The calculated reading is refreshed every time the instrument takes a reading.
:KMATh Commands
:MMFactor <NRf>
Command syntax:
:CALCulate[1]:KMATh:MMFactor <NRf>
Command Parameter:
<NRf> = -100e6 to 100e6
Query:
:MMFactor?
Description:
This command is used to define the "m" factor for the mx+b calculation.
:MBFactor <NRf>
Command syntax:
:CALCulate[1]:KMATh:MBFactor <NRf>
Command Parameter:
<NRf> = -100e6 to 100e6
Query:
:MBFactor?
Description:
This command is used to define the "b" factor for the mx+b calculation.
No calculations
Polynomial math calculation
Percent math calculation
Query programmed math format
Specify "m" factor.
Query "m" factor.
Specify "b" factor.
Query "b" factor
ABM-4082
65