Table of Contents
Advertisement
ABM-4082
1.4
Safety symbols and Precautions
The
symbol on the instrument indicates that user should refer to the operating instructions located in
the manual before performing.
The
symbol on the instrument shows that high voltage may be present on the terminal(s). Be careful
to avoid personal contact with these voltages.
The symbol
on the instruments means earth grounding.
The WARNING heading used in the manual explains high voltage danger that might result in personal injury
or death. Always read the associated information very carefully before performing the indicated procedure.
The CAUTION heading in the manual reminds user that hazards could damage the instruments if not
according to operating instructions. Such damage may invalidate the warranty.
1.5
Incoming Inspection
The DMM was carefully inspected mechanically and electrically before shipment. After unpacking all items
from the shipping carton, please check for any obvious signs of physical damage that may have occurred
during transportation. Report any damage to the shipping agent immediately. Save the original packing
carton for possible future reshipment. The following items are included with every Model DMM order:
Model DMM 5
Test leads
Power cord
Two 500mA fuses
Two 1A fuses
Operation Manual
Quality and warranty certificate
Test report
Other optional accessories if ordered
Verify that you have received all the items above when you get multimeter. If anything is missing, please
contact our representative or our sales office.
Note:
IEEE-488 and RS232C interface is optional, additional order is needed.
8
1
/
Digital Multimeter
2
Advertisement
Table of Contents
