Aktakom ABM-4082 User Manual page 77

[:SENSe[1]]:CURRent:AC:RANGe[:UPPer] <n>
[:SENSe[1]]:CURRent[:DC]:RANGe[:UPPer] <n>
[:SENSe[1]]:VOLTage:AC:RANGe[:UPPer] <n>
[:SENSe[1]]:VOLTage[:DC]:RANGe[:UPPer] <n>
[:SENSe[1]]:RESistance:RANGe[:UPPer] <n>
[:SENSe[1]]:FRESistance:RANGe[:UPPer] <n>
Command Parameter:
<n> = 0 to 10
0 to 757.5
0 to 1010
0 to 120e6
DEFault
MINimum
MAXimum
Query:
:RANGe[:UPPer]?
Description:
This command is used to manually select the measurement range for the specified measurement
function. The range is selected by specifying the expected reading as an absolute value. The
instrument will then go to the most sensitive range that will accommodate that expected reading. For
example, if you expect a reading of approximately 50mV, simply let the parameter (<n>) =0.05 (or
50e-3) in order to select the 100mV range.
:AUTO <b>
Command syntax:
[:SENSe[1]]:CURRent:AC:RANGe:AUTO <b>
[:SENSe[1]]:CURRent[:DC]:RANGe:AUTO <b>
[:SENSe[1]]:VOLTage:AC:RANGe:AUTO <b>
[:SENSe[1]]:VOLTage[:DC]:RANGe:AUTO <b>
[:SENSe[1]]:RESistance:RANGe:AUTO <b>
[:SENSe[1]]:FRESistance:RANGe:AUTO <b>
Command parameter:
<b> = 1 or ON
0 or OFF
Query:
:AUTO?
Expected reading is amps (ACI, DCI)
Expected reading is AC volts (ACV)
Expected reading is DC volts (DCV)
Expected reading is ohms (Ω2, Ω4)
10 (ACI and DCI)
757.5 (ACV)
1000 (DCV)
100e6 (Ω)
0 (All functions)
Same as DEFault
Query measurement range of the current functon.
Enable auto range
Disable auto range
Query auto range (ON or OFF)
Set measurement range for ACI
Set measurement range for DCI
Set measurement range for ACV
Set measurement range for DCV
Set measurement range for Ω2
Set measurement range for Ω4
Set auto range for ACI
Set auto range for DCI
Set auto range for ACV
Set auto range for DCV
Set auto range for Ω2
Set auto range for Ω4
ABM-4082
77