Table of Contents
Advertisement
ABM-4082
2.4
Front Panel Menu Overview
The menu is organized in a top-down tree structure with three levels (menus, commands and parameters)
as shown in Figure 2-3. You can use down (
another. Each of the three levels has several horizontal choices which you can view by using left (
or right (
).
Commands
Parameters
To turn on the menu, press Shift →
To turn off the menu, press Shift →
the top row of front panel keys.
To confirm a change on the "parameter" level, press Auto (ENTER).
To cancel a change on the "parameter" level, press Trig (ESC).
To recall the last menu command that was executed, press Shift →
The messages displayed during menu operation are listed in following Table 2-1.
MESSAGES
CHANGE SAVED
TOO SMALL
TOO LARGE
FILE SAVING
FILE LOADING
SAVE SUCCEED
LOAD SUCCEED
Note:
If you press
any higher; similarly if you press
menu and you cannot go any lower.
14
Menus
Figure 2-3
Table 2-1
Messages Displayed During Menu Operation
The change made on the "parameter" level is saved. This message will be
displayed after you press Auto (ENTER) to execute the command.
The value you specified on the "parameter" level is too small for the selected
command. The minimum value allowed is displayed for you to edit.
The value you specified on the "parameter" level is too large for the selected
command. The maximum value allowed is displayed for you to edit.
System configuration file is being saved.
System configuration file is being restored.
System configuration file is successfully saved.
System configuration file is successfully restored.
on the "menu" level, this is the top level of the menu and you can not go
on the "parameter" level, this is the bottom level of the
) or up (
) to move menu tree from one level to
Menu Tree
(Menu).
(Menu), or press any of the function or math keys on
DESCRIPTION
(Recall)
)
Advertisement
Table of Contents
