Front Panel Menu Reference - Aktakom ABM-4082 User Manual

ABM-4082
FAST Fast reading rate
FILT Digital filter enabled
HOLD Reading HOLD is enabled
MATH A math operation is enabled (mX+b, %, dB, dBm).
MED Medium reading rate
MEM Turns on when reading memory is enabled
REL Relative reading displayed
RMT Multimeter is in remote mode
SHIFT Accessing shifted keys
SLOW Slow reading rate
TRIG Multimeter is waiting for an external trigger (front panel or bus).
2.3

Front Panel Menu Reference

A：MEASurement MENU
1:CONTINUITY → 2:FILTER → 3:FILT TYPE → 4:FILT COUNT
1. CONTINUITY
2. FILTER
3. FILT TYPE
4. FILT COUNT
B：MATH MENU
1:SET M → 2:SET B → 3:PERCENT → 4:dB REF → 5:dBm REF → 6:LIMIT TEST → 7:HIGH LIMIT →
8:LOW LIMITT→ 9:LIMIT BEEP
1. SET M
2. SET B
3. PERCENT
4. dB REF
5. dBm REF
6. LIMIT TEST
7. HIGH LIMIT
8. LOW LIMIT
9. LIMIT BEEP
C：TRIGger MENU
1:READ HOLD → 2:READ COUNT → 3:TRIG MODE → 4:TRIG DELAY
1. READ HOLD
2. READ COUNT
3. TRIG MODE
4. TRIG DELAY
D：SYStem MENU
12
Select the continuity beeper threshold: 1Ω to 1000Ω.
Enable or disable FILTER function.
Select the moving average or repeating average type of filter.
Set the number of readings to be filtered or averaged.
Set the scale factor M for MX+B function.
Set the offset factor B for MX+B function.
Set the reference value for PERCENT function.
Set the dB reference voltage value.
Set the dBm reference impedance value.
Enable or disable the limit testing.
Set the high limit for limit testing.
Set the low limit for limit testing.
Set the beep mode for limit testing.
Set the reading hold sensitivity band.
COUNT of readings for reading hold.
Select INTernal, MANUal or BUS trigger source mode.
Select AUTO or MANUal trigger delay mode and specified a time interval
which is inserted before a measurement for the MANUal trigger delay mode.