Related Manuals for Aktakom AMM-1048
Summary of Contents for Aktakom AMM-1048
-
Page 2: Meter Description
Features 3-3/4 digit 4000 count) LCD display Built-in non-contact AC voltage detector plus flashlight Double Molded housing CATIII 1000V 200mA/500V Resettable Fused current inputs and Overload protection on all ranges Autoranging with auto power off Safety International Safety Symbols This symbol, adjacent to another symbol or terminal, indicates the user must refer to the manual... - Page 3 Specifications Electrical Specifications Function Range Accuracy DC Voltage 400mV, (0.5% rdg + 3d) (1.2% rdg + 3d) 4.000V,40.00V, 400.0V, 600V (1.0% rdg + 8d) AC Voltage 4.000V, 40.00V 50-60Hz 400.0V, 600V (2.3% rdg + 10d) (2.0% rdg + 8d) DC Current 400.0µA, 4000µA 40.00mA, 200.0mA (2.5% rdg + 10d)
- Page 4 Operation AC/DC VOLTAGE MEASUREMENTS CAUTION: Do not measure AC/ DC voltages if a motor on the circuit is being switched ON or OFF. Large voltage surges may occur that can damage the meter. 1. Set the function switch to the green V position. 2.
-
Page 5: Capacitance Measurement
Capacitance Measurement WARNING: To avoid electric shock, disconnect power to the unit under test and discharge all capacitors before taking any capacitance measurements. Remove the batteries and unplug the line cords. Never measure continuity on circuits or wires that have voltage on them. 1.