Table of Contents
Advertisement
ABM-4082
Press Shift →
1.
2.
Use
or
be displayed.
3.
Press
to move down to the command level within the MATH MENU, "1: SET M" will be
displayed.
4.
Use
or
displayed.
5.
Press
to move down a level to set LIMIT TEST function to ON.
6.
Press Auto (ENTER) to confirm the set of LIMIT TEST function. The message "CHANGE SAVED"
will be displayed to show that the change is now in effect. DMM will exit the parameter level and move
up a level to the command level.
Press Shift →
7.
8.
When the multimeter returns to the normal display, the HI/IN/LO status is displayed along with the
reading.
4.4.2
Setting Limit Values
Use the following steps to enter high and low limit values:
Press Shift →
1.
2.
Use
or
be displayed.
3.
Press
to move down to the command level within the MATH MENU, "1: SET M" will be
displayed.
4.
Use
or
displayed.
5.
Press
to move down a level to input the high limit value. The present high limit value will be
displayed:
HI: +1.00000
6.
Use
and
or decrement the digits. Enter an expected value for high limit.
7.
Press Auto (ENTER) to confirm the value of high limit. The message "CHANGE SAVED" will be
displayed to show that the change is now in effect. DMM will exit the parameter level and move up a
level to the command level.
or
8.
Use
displayed.
9.
Press
to move down a level to input the low limit value. The present low limit value will be
displayed:
LO: -1.00000
10. Use
and
or decrement the digits. Enter an expected value for low limit.
11. Press (ENTER) to confirm the value of low limit. The message "CHANGE SAVED" will be displayed to
show that the change is now in effect. DMM will exit the parameter level and move up a level to the
command level.
42
to enter the menu on the menu level, "A: MEAS MENU" will be displayed.
key to move across to the MATH MENU on the menu level, "B: MATH MENU" will
key to move across to the LIMIT TEST command, "6: LIMIT TEST" will be
key to exit from the menu and return to the measurement status.
to enter the menu on the menu level, "A: MEAS MENU" will be displayed.
key to move across to the MATH MENU on the menu level, "B: MATH MENU" will
key to move across to the HIGH LIMIT command, "7: HIGH LIMIT" will be
keys to choose a numerical place and use
key to move across to the LOW LIMIT command, "8: LOW LIMIT" will be
keys to choose a numerical place and use
and
keys to increment
and
keys to increment
Advertisement
Table of Contents
