Aktakom ABM-4082 User Manual page 61

Command parameter :
<function> = VOLTage[:DC]
VOLTage:AC
CURRent[:DC]
CURRent:AC
RESistance
FRESistance
FREQuency
PERiod
DIODe
CONTinuity
Query:
:CONFigure?
Description:
This command configures the instrument for subsequent measurements on the specified function.
Basically, this command places the instrument in a "one-short" measurement mode. You then use
the :READ? command to trigger a measurement and acquire a reading.
When this command is sent, the DMM will be configured as follows:

The function specified by this command is selected.

All controls related to the selected function are defaulted to the *RST values.

Continuous initiation is disabled.

The control source of the Trigger Model is set to Immediate.

The count values of Trigger Model are set to one.

The delay of the Trigger Model is set zero.

All math calculations are disabled.

Buffer operation is disabled. A storage operation currently in process will be aborted.

Autozero is set to the *RST default value.

This command is automatically adderted when the :MEASure? Command is sent.
FETCh? Command
Command syntax:
:FETCh?
Description:
This query command is used to obtain the lastest post-processed reading. This command does not
affect the configuration of the instrument.
This command does not trigger a measurement. The command simply requests the last available
reading. This command continues to return the same old reading, until there is a new reading.
DC voltage
AC voltage
DC current
AC current
2-wire resistor
4-wire resistor
Frequency
Period
Diode testing
Continuity test
Query the selected function.
ABM-4082
61