Table of Contents
Advertisement
show that the change is now in effect. DMM will exit the parameter level and move up a level to the
command level.
Press Shift →
6.
5.3.4
General Bus Commands
General commands are those commands, such as DCL, that have the same general meaning regardless of
the instrument. Table 5-4 lists the general bus commands along with the programming statement for each
command.
Command
REM
IFC
LLO
GTL
DCL
SDC
GET
SPE，SPD
For SCPI commands, please refer to Chapter 6: SCPI Command reference
5.4
Data Format
DMM outputs the measurement results using the ASCII character string format via the GPIB bus. The data
format is described in the following Figure 5-5.
key to exit from the menu and return to the measurement status.
Table 5-4 General bus commands and associated statements
Programming
statement
REMOTE 8
Goes into effect when next addressed to listen
ABORT 8
Goes into talker and listener idle states
LOCAL
LOCAL keys locked out
LOCKOUT
Cancel remote; Restore front panel operation for the
LOCAL 8
multimeter.
CLEAR
Return all devices to known conditions.
CLEAR 8
Return the DMM to known condition
TRIGGER 8
Initiates a trigger
SPOLL 8
Serial Polls the DMM
SD.DDDDDDESDDD<NL>
S: +/-
D: number 0 to 9
E: exponent sign ("+"is omitted)
<NL>: New Line, ASCII code is 10
Figure 5-5 Data Format
Effect on Model DMM Multimeter
ABM-4082
55
Advertisement
Table of Contents
